Design Decisions That Reduce Manufacturing Costs
If you desire to reduce your PCB manufacturing costs, you will usually need to seek the services of non-North American electronics manufacturers. For good pricing combined with high quality and exceptional service, you will learn that assembly houses west of the Atlantic and east of the Pacific are best. But an in expensive manufacturer isn’t the only thing that will keep your costs low. How you design an electronic circuit influences costs in important ways. To understand how design influence costs, let us examine some important design elements and see how they affect costs.
Extending the PCB manufacturing cycle
The faster you want your PCBs delivered to you, the more you will end up paying. Sometimes you will need to pay for short manufacturing cycles. Bittele Electronics has the capability of sending you a kitted assembly within 24 hours, however, it is very expensive. A more cost-effective approach is to utilize Bittele’s 20-day turnaround time. By extending the manufacturing cycle so you can accept longer delivery dates, you will drastically reduce your manufacturing costs.
Do not specify leadless QFNs and BGAs
SMT assembly line Company manufactures a large amount of PCBs that utilize BGA and QFN packages, including micro BGAs with a pitch as low as 0.3 mm. Since these packages have their leads placed underneath, we must X-ray each part, which increases the cost of the manufacturing process. If you must use leadless packages, that’s fine. However, if you can use TSSOPs or other packages with visible leads, you will decrease your costs considerably.
Reels or Continuous Strips are Less Costly
SMT assembly line Company can assembly PCBs with any kind of parts or any size. However, it is less expensive to use reels or (at the very least) 12-inch continuous strips. We typically pass on cost savings to the customer for reel or continuous strip processing.
Surface Mount is Less Expensive than Through-Hole Parts
Hand assembly is usually more expensive than automated assembly. Therefore, surface mount parts are usually less expensive to assemble than through-hole parts. For designs where there are very few through-hole parts, you can save yourself money by letting Bittele assemble the surface mount parts while you solder the through-hole parts yourself.
Large PCBs are less expensive than very small PCBs
Large PCBs are easier to assemble than very small PCBs, therefore, they are less expensive because Bittele will have lower labor costs. If you need to use tiny PCBs (i.e. less than 16 sq inches), it’s wise to panelize them in order to keep your costs low.
SMT assembly line Company has the reputation for giving top quality service and customer care no matter where you are located in the world. You will know when you will receive your PCBs, not a rough estimate. Using these suggestions, you will receive excellent service and quality at an attractive price.
SMT Reflow Oven, Lead free Reflow Oven, Reflow Oven Manufacturer, LED reflow oven, PCB Reflow Oven, Nitrogen Reflow Oven, Dual Rail Reflow Oven, China Reflow Oven, wave soldering machine, Dual Rail Wave Soldering Machine, Nitrogen Wave Soldering Machine, Wave Soldering Machine Manufacturer.
Flason Electronic Co.,ltd provide a full smt assembly line solutions, including SMT reflow oven, wave soldering machine, pick and place machine, solder paste printer, PCB loader, PCB unloader, Chip mounter, SMT AOI machine, SMT SPI machine, SMT X-Ray machine, SMT assembly line equipment, PCB production Equipment smt spare parts etc any kind SMT machines you may need, please contact us for more information: wechat whatsapp:008613691605420, Skype: flasonsmt, Email: firstname.lastname@example.org
1) This is the first time I use this kind of machine, is it easy to operate?
There is English manual or guide video that show you how to use machine.
If you still have any question, please contact us by e-mail / skype/ phone /trademanager online service.
2) If machine have any problem after I receive it, how can I do ?
Free parts send to you in machine warranty period.
If the part is less than 0.5KG, we pay the postage.
If it exceeds 0.5KG, you need to pay the postage.
3) MOQ ?
1 set machine, mixed order is also welcomed.
4) How can I buy this machine from you? ( Very easy and flexible !)
A. Consult us about this product on line or by e-mail.
B. Negotiate and confirm the final price , shipping , payment methods and other terms.
C. Send you the proforma invoice and confirm your order.
D. Make the payment according to the method put on proforma invoice.
E. We prepare for your order in terms of the proforma invoice after confirming your full payment.
And 100% quality check before shipping.
F.Send your order by air or by sea.
5)Why choose us ?
A. Gold supplier on Alibaba !
B. Trade assurance to US$54,000 !
C. Best price & Best shipping & Best service !