Home > Wafer Fabricaton

  • Nikon Steppers NES1W-ghi06 NES2W-ghi06
Nikon Steppers NES1W-ghi06 NES2W-ghi06

Nikon Steppers NES1W-ghi06 NES2W-ghi06

  • Wavelength (nm):365-436
  • Throughput:150NES1W-ghi06: 150mm – 87
  • Wafer Size (mm):150-200
  • Product description: Nikon Steppers NES1W-ghi06 NES2W-ghi06 for MEMS, LEDs, and Packaging Markets, Wavelength (nm):365-436, Throughput:150NES1W-ghi06: 150mm – 87, Wafer Size (mm):150-200
  • INQUIRY

Nikon Steppers NES1W-ghi06 NES2W-ghi06 for MEMS, LEDs, and Packaging Markets

Specifications:

Key Benefits
Deliver ghi-line capabilities with resolution below 2.5 µm
Accommodate challenging process requirements with > 20 µm depth of focus
Enhance mix and match with NSR steppers using 22 mm field size
Provide excellent overlay performance for large field
Support backside alignment to 0.8 µm


Deliver ghi-line capabilities with resolution below 2.3 µm
The need for varied exposure wavelength capabilities is becoming increasingly prevalent in MEMS, IC backend, and power device applications. Nikon recognizes this trend, and NES1W-ghi06 and NES2W-ghi06 steppers utilize broadband illumination to accommodate ghi-line resist processing and increase throughput. These systems employ 365-436 nm exposure wavelength to deliver resolution below 2.3 µm, with champion performance down to 1.7 µm. They fully satisfy the unique and ever-changing requirements for specialized applications.

Accommodate challenging process requirements with 22 µm depth of focus
NES1W-ghi06 and NES2W-ghi06 systems utilize a 0.13 numerical aperture projection lens design with 1.8x reduction that was developed to address the imaging challenges of power devices, as well as MEMS and backend IC layers. The NES1W-ghi06 and NES2W-ghi06 enable very large depth of focus —up to 22 µm, and their advanced autofocus systems provide die-by-die autofocus capabilities that further increase yield for these difficult processes.

Enhance mix and match with NSR steppers using 22 mm field size
The NES1W-ghi06 and NES2W-ghi06 makes use of advanced lens technology to enable the same 22 mm x 22 mm exposure field as traditional 5x reduction steppers, simplifying mix-and-match applications while boosting productivity. To further simply matching and reticle design, it is also possible to use the same alignment marks (FIA X/Y simultaneous marks) on these systems as on traditional NSR steppers.

Provide excellent overlay performance for large field
Problematic effects such as wafer deformation and process-induced shrinkage can be challenging for some applications; however, the NES1W-ghi06 and NES2W-ghi06 employ enhanced global alignment (EGA) to optimize overlay accuracy to 0.30 and 0.35 µm respectively for the large 22 mm field. EGA functions by utilizing multiple alignment marks across the wafer to ensure best fit alignment and thereby compensate for rotation issues or process-induced deformations. Pattern Matching Alignment capabilities are also available to provide increased flexibility for reticle design.

Support backside alignment to 0.8 µm
Customers may also choose to add on backside alignment functionality to enable precise alignment of 0.8 µm and below to marks located on the backside of the wafer surface. The newly developed backside alignment system incorporates both direct and infra-red alignment capabilities to optimize performance.

Basic Specifications:


· Wavelength (nm)

· Lens-NA

· Exposure Area (mm)

· Reduction Ratio

· Resolution (µm)

· Depth of Focus (µm)

· Overlay Accuracy (µm)

· Throughput

· Wafer Size (mm)

· 365-436

· 0.13

· 22 mm square to 17.9 (H) x 25.2 (V) mm

· 1/1.8

· 2.3

· 22

· NES1W-ghi06: 0.30 NES2W-ghi06: 0.35

· NES1W-ghi06: 150mm – 87 WPH NES2W-ghi06: 200 mm – 48 WPH

· NES1W-ghi06: ≤150 NES2W-ghi06: 150 and 200

Sample data from the NES1-h04 demonstrates BSA capabilities well below 0.8 µm.

Keywords:

Semiconductor silicon wafer production equipments, Wafer Fabricaton/12in, Wafer Fabricaton/8in, Wafer Fabricaton/6in Equipment, Wafer Fabricaton/Under 4in Equipment, Wafer Manufactureing Equipment, ASSY/TEST Equipment, Electrical parts equipmentAnlysis/Measurement equipmentSemiconductor production Common equipment.

Flason Electronic Co.,ltd provide a full Silicon Wafer prodocution line solutions, including Scanner Stepper Coat and Develop Dry Etch Asher Furnace RTP Epitaxy CVD PVD Ion Implant Wet Etch CMP Clean and Dry Plating machines and other Simeconductor Production machines you may need, please contact us for more information: wechat whatsapp IMO: 008613691605420, Skype: flasonsmt, Email: sales@flason-smt.com

FAQ

1) This is the first time I use this kind of machine, is it easy to operate?

There is English manual or guide video that show you how to use machine.

If you still have any question, please contact us by e-mail / skype/ phone /trademanager online service.

2) If machine have any problem after I receive it, how can I do ?

Free parts send to you in machine warranty period.

If the part is less than 0.5KG, we pay the postage.

If it exceeds 0.5KG, you need to pay the postage.

3) MOQ ?

1 set machine, mixed order is also welcomed.

4) How can I buy this machine from you? ( Very easy and flexible !)

A. Consult us about this product on line or by e-mail.

B. Negotiate and confirm the final price , shipping , payment methods and other terms.

C. Send you the proforma invoice and confirm your order.

D. Make the payment according to the method put on proforma invoice.

E. We prepare for your order in terms of the proforma invoice after confirming your full payment.

And 100% quality check before shipping.

F.Send your order by air or by sea.

5)Why choose us ?

A. Gold supplier on Alibaba !

B. Trade assurance to US$54,000 !

C. Best price & Best shipping & Best service !